PVM

Fragrance for Women

Sort By:  
Steca Solsum 10.10F Charge Controller
$0.00  Inc Tax
Phocos CX10 10A 12V/24V Charge Controller
$0.00  Inc Tax
Phocos CML05 5A 12V/24V Charge Controller
$0.00  Inc Tax
Luminous PWM Solar Charge controller - 10 Amp
$0.00  Inc Tax
Microcare 10 Amp LED MPPT Charge Controller
$0.00  Inc Tax
Steca Solarix Charge Controller PRS 3030 (PRS3030 )

The simplicity and high performance of the Steca Solarix PRS solar charge controller make it particularly appealing. At the same time, it offers a modern design and a convenient display, all at an extremely attractive price.

Several LEDs in various colours give information on the battery‘s state of charge. Here, Steca’s latest algorithms are employed, resulting in optimal battery maintenance. The Solarix PRS charge controllers are equipped with an electronic fuse, thus making optimal protection possible. They operate on the serial principle, and separate the solar module from the battery in order to protect it against overcharging.

For larger projects, the charge controllers can also be equipped with special functions: e.g. with night light function and selectable charging plateau and deep-discharge protection voltages.

Suitable for small home systems

* Night light function

* 720w Maximum input power of the solar modules



PRODUCT FEATURES

  • Automatic detection of voltage
  • Voltage regulation
  • PWM control
  • Series controller
  • Multistage charging technology
  • Current compensated load disconnection
  • Automatic load reconnection
  • Temperature compensation
  • Common positive or negative grounding on one terminal
  • Monthly maintenance charge

ELECTRONIC PROTECTION FUNCTIONS

  • Overcharge protection
  • Deep discharge protection
  • Reverse polarity protection of module, load and battery
  • Reverse polarity protection of module (≤36 V),load and battery
  • Automatic electronic fuse
  • Short circuit protection of load and module
  • Overvoltage protection at module input
  • Open circuit protection without battery
  • Reverse current protection at night
  • Overtemperature and overload protection
  • Load disconnection on battery overvoltage

DISPLAYS

  • Multifunction LED display
  • Multi-coloured LED
  • 5 LEDs show operating states
  • for operation, state of charge, fault messages

OPTIONS

  • Night light function pre-set in the factory or adjustable via Steca PA RC 100
  • Parameterisation of function values via Steca PA RC 100

 

TECHNICAL SPECIFICATION

Specifications: Technical data at 25 °C / 77 °F 

  • Model Number: Steca Solarix PRS 3030 
  • System Voltage:12v / (24v)
  • Maximum Module Input, open circuit voltage:<47 volts
  • Maximum Module Input, short circuit current:30 amps
  • Maximum Load, output current: 30 amps 
  • Maximum Self Consumption: 12mA
  • End of Charge Voltage(float): liquid 13.9 V / (27.8 V) gel 14.1 V (28.2 V)
  • BoostCharge Voltage: 14.4 V / (28.8 V) 2:00 h
  • equalisation charge(deactivated for gel accu): 14.7 V / (29.4 V) 2:00 h
  • Reconnection Setpoint (LVR): > 50 % SOC / 12.6 V (25.2 V)
  • Deep Discharge Protection (LVD): < 30 % SOC / 11.1 V (22.2 V)
  • Ambient Temperature Allowed: -10 °C...+50 °C
  • TerminalSize (fine / single wire): 16 mm² / 25 mm²
  • EnclosureProtection Class: IP 22
$0.00  Inc Tax
Steca Solsum 10.10F Charge Controller (1010F)

Steca Solsum Charge Controller 10.10F Product features

*Suitable for very small homes 
*Maximum PV input 240W (2 x 120W modules)

The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers. With a power range of up to 10 A at automatically recognized 12 V or 24 V it fits to a system sizes of maximum 240 W.

  • Series controller
  • Voltage regulation
  • Automatic detection of voltage
  • MWM control
  • Multistage charging technology
  • Current compensated load disconnection
  • Automatic load reconnection
  • Temperature compensation
  • Common positive grounding or negative grounding on one terminal
  • Monthly maintenance charge

Electronic protection functions

  • Overcharge protection
  • Deep discharge protection
  • Reverse polarity protection of load, module and battery
  • Automatic electronic fuse
  • Short circuit protection of load and module
  • Overvoltage protection at module input
  • Open circuit protection without battery
  • Reverse current protection at night
  • Overtemperature and overload protection
  • Battery overvoltage shutdown

Displays

  • Multifunction LED display
  • Multi-coloured LED
  • 4 LEDs show operating states
  • for operation, state of charge, fault messages
Steca Solsum 10.10F Charge Controller
$0.00  Inc Tax
Phocos CX10 10A 12V/24V Charge Controller
The CX series is a sophisticated solar charge controller family with exceptional features for its price range. Beside perfect PWM regulation with integrated temperature compensation the controllers provide extraordinary display, programming and safety functions.The battery state of charge is clearly displayed with a bar chart, as well as energy flows from and to the battery and the load status (e.g. overload, load short circuit). The deep discharge protection function can be set up to three different modes: voltage controlled, SOC controlled or adaptive (fuzzy logic). Acoustic warnings are built in as well as a programmable nightlight function.

FEATURES

* Battery State-of-Charge LCD display

* Charge and discharge status display

* Acoustic load disconnect pre-warning

* Load status indication

* Choose between 5 load disconnect algorithms

* Boost / absorption / float PWM-regulation (series type)

* Automatic 12 / 24 Volt detection

* Integrated temperature compensation

* Covered terminals (up to 16mm² wire size)

* Full solid-state protection

Technical Specifications

* System voltage: 12V / 24V

* Maximum module current: 10A

* Maximum load current: 10A

* Boost charge voltage: 14.4V / 28.8V

* Equalization charge voltage: 14.8V / 29.6V

* Float charge voltage: 13.7V / 27.4V

* Load disconnect voltage: 11.0V to 12.2V / 22.0V to 24.4V depending on setting

* Load reconnect voltage: 12.8V / 25.6V

* Self power consumption: < 4mA

Phocos CX10 10A 12V/24V Charge Controller
$0.00  Inc Tax
Phocos CML05 5A 12V/24V Charge Controller
The CML series is a sophisticated solar charge for low cost applications. The electronic circuit is equipped with a microcontroller that provides high- efficiency charging technology together with a number of outstanding status display, warning and safety functions. The temperature-compensated three-stage PWM charging method (boost-equalization-float) is now adjustable to sealed and vented lead-acid batteries.ing feature •Battery State-of-Charge display with 3LEDS •Acoustic load disconnect pre-warning •PWM-regulation (series type) •Boost, Equalize and Float charging, also for VRLA •Automatic 12/24V detection •Integrated temperature compensation •Large terminals (up to 16 mm wire size) •SOC and voltage controlled LVD •Fully electronically protected Type of protection : IP22
Phocos CML05 5A 12V/24V Charge Controller
$0.00  Inc Tax
Luminous PWM Solar Charge controller - 10 Amp

It has USB charging Option for mobile charging & dusk to dawn feature. It comes with Electronic & Software controlled protections. Maintenance Free. USB Mobile charger Output. 

Product Descriptions

Model Name

Solar Charge Controller 1210N

Manufacturer warranty

12 months

Maximum Charging current

10 Amp

Output

12 Volt / 24 Volt DC

Panel SupportUp to 400 Watts

 

Features

  • Automatic selection of 12V / 24V battery
  • 98% efficiency
  • Fuseless electronic & software controlled protections
  • USB port for Mobile charging 
  • Option of SMF and lead acid battery selection
  • Load controller with LVD & dusk to dawn feature

Technical specifications

  • PWM based technology
  • Automatic battery voltage selection of 12/24 Volt.
  • In built low voltage disconnect & 20% extra power than rated capacity
  • Supports up to 200 Watt panels on 12 Volt Battery
  • Supports up to 400 Watt Panels for 24 Volt battery . 
Luminous PWM Solar Charge controller - 10 Amp
$0.00  Inc Tax
Microcare 10 Amp LED MPPT Charge Controller (MICROCARE10AMP)

The MICROCARE MPPT REGULATOR is designed to interface between the solar panel, the batteries and the load. The tracker will always find the optimum power point of the solar panel system to ensure that maximum power is extracted from the solar panel and put into the batteries.

Using this system up to 30% more power can be extracted from the solar panel than using shunt or series pass regulators. The regulator is also able to charge batteries of a lower voltage than the solar panel. By means of  LEDS  it will show the status of the system.  It also incorporates various charge modes which will automatically increase the charge level to the batteries when first starting up or if the battery voltage falls below the min volts. The  regulator will read the nominal battery voltage. This unit is designed to run on a 12/24 volt battery set. It will then read the solar panel voltage and automatically find the optimum power point. The charging , battery values and boost modes are then automatically adjusted.

Via links the load voltage disconnect can be selected, whether the battery is lead acid or sealed, and whether the unit operates as a normal load shedder or as a day/night switch.

Features

JUMPER SELECTION

* Load disconnect. Place the jumper onto the selected low voltage disconnect.
* Remove the battery jumper for Sealed Gel Batteries.
* Remove the jumper if the DAYLIGHT SWITCH is required

CONNECTING THE UNIT.

* Ensure that all cabling used is kept as short as possible as volt drops caused by long cables will reduce the efficiency of the TRACKER. Connect the unit as shown in the diagram.  Minimum recommended wire diameter = 4 mm²
* First connect the Load and then the Battery.
* The Led display will show the TRACKER checking the battery voltage. The MEDIUM led will flash once for a 12 volt battery and twice for a 24volt system. At the same time the buzzer will sound once for a 12 volt and twice for a 24 volt system.
* Connect the  solar panel. The PANEL led will come on if there is panel power.
* The Regulator will now read the solar panel voltage and select the optimum power point. If there is sufficient power in the solar panel the TRACKER will now start charging.

CHARGING THE BATTERIES.

BOOST MODE: The batteries are charged until they reach the boost voltage 14.8 or 29.6. When the batteries reach this level the tracker will hold this rate for a minimum of 1/2 hour indicated by flashing BOOST LED and then switch to Float Mode. If the batteries fall below the BOOST voltage then the timer is reset ie at night or during cloudy days. This ensures that the batteries are fully Boosted. 

FLOAT MODE: Boost Light is off - The batteries are now essentially in trickle charge mode 

6 LED DISPLAY
· Panel
· Load
· Boost
· Full Battery
· Medium Battery
· Low Battery

AUDIBLE BUZZER

When the batteries are connected for the first time the buzzer will sound once for 12 volt and twice for a 24 volt battery set. The buzzer will beep when the battery voltage has reached within 1/2 a volt of the battery load disconnect for a 12 volt system and within one volt of load disconnect for a 24 volt battery set. The Buzzer will beep 10 times when the load disconnect is about to trip.

RESET BUTTON. 

Pushing the reset button cancels the buzzer. If the unit is in LOAD SHED the reset button will reset the load but if the voltage is too low then the load disconnect will operate.

Technical Specs


MAXIMUM SOLAR PANEL VOLTAGE: 50.0 V DC
MAXIMUM BATTERY SYSTEM: 24 DC<
MAXIMUM CHARGE CURRENT: 10A DC
MAXIMUM LOAD: 10 AMPS
FLOAT CHARGE VOLTAGE: 13.8v 27.6 volts DC
BOOST CHARGE VOLTAGE: 14.8v 29.6 volts DC
MAXIMUM PANEL SIZE: 12 volts - 120 watts; 24 volts -  240 watts

The Microcare Maximum Power Point Tracker Regulator is designed to interface between the solar panel, the batteries and the load. The tracker will always find the optimum power point of the solar panel system to ensure that maximum power is extracted from the solar panel and put into the batteries. Using this system up to 30% more power can be extracted from the solar panel than using shunt or series PWM regulators. The Microcare MPPT Regulator is also able to charge batteries of a lower voltage than the solar panel. By means of LED it will show the status of the system. It also incorporates various charge modes which will automatically increase the charge level to the batteries when first starting up or if the battery voltage falls below the minimum volts.

Microcare 10 Amp LED MPPT Charge Controller
$0.00  Inc Tax
Per Page      1 - 6 of 6
  • 1